How to Run a Traceroute
A Traceroute can be run from your computer to show the path an Internet protocol packet takes as it travels to its destination, Traceroute is a command-line tool installed on all Windows operating systems. Traceroute, or Tracert, is beneficial for troubleshooting a network connection because it displays a list of all locations a packet must connect with prior to reaching the instructed final destination. If packets are failing to reach the final destination, you can use Traceroute to determine the problematic location. Traceroute is very useful for local networks to identify a problematic router or firewall.
Read more : http://www.ehow.com/how_7472396_traceroute-instructions.html
Press the “Windows” and “R” keys simultaneously. This opens the Run box on the bottom of your screen.
Type “CMD” in the “Run” box and click the “OK” button. This loads the Command Prompt utility in a new window on your screen.
Type “Tracert address” and press the “Enter” key. Replace “Address” with the actual address you need to trace. You can use any numerical or alphabetical address. For example, type “Tracert www.google.com” or “Tracert 192.168.0.1” and press “Enter.”
Look at the information that displays after pressing the “Enter” key. This is the trace information. Each line is called a “Hop.” Each hop is a point of location that your packet reaches prior to the destination. The numbers with a “ms” next to them are the latency values and the information at the far right is the actual location. A potential connection problem will be indicated by an asterisk “*” instead of a number next to “MS.”
Posted in: Tips & Tricks, Video GuideLeave a Comment (0) ↓